Xinhong Heat Press

 

Yadda ake Amfani da Rosin-tech Heat Press?

● Fitar da latsa rosin daga kunshin.

● Toshe soket ɗin wuta, kunna wutar lantarki, saita lokaci & lokaci don kowane kwamiti mai kulawa, Ka ce.230 ℉/110 ℃, 30 seconds.kuma yana tasowa zuwa yanayin da aka saita.

● Saka rosin hash ko tsaba a cikin jakar tacewa

● Yi amfani da takarda don rufe jakar tacewa kafin sanyawa kan ƙananan kayan dumama.

● Latsa maɓallin TIMER akan kwamitin kulawa.Ƙungiyar sarrafawa ta fara nuna kirgawa.

● Jira har sai lissafin ya ƙare kuma latsa ya fara ƙara.
Danna maɓallin TIMER don kashe mai ƙidayar lokaci kuma a daina ƙara.
● Domin aiki na inji, da farko kuna buƙatar daidaita ƙarfin na'ura ta hanyar matsi na goro, juya goro daga dama zuwa hagu don ƙarfin latsawa, akasin haka, rage matsa lamba.

Da fatan za a lura cewa kar a daidaita matsa lamba da yawa, kuma danna shi ta hanyar tsalle sama, yi amfani da nauyin jikinka duka don danna ƙasa, zai lalata hannun injin, kuma yana tasiri rayuwar sabis na injin.

● Man rosin zai zama manne akan takarda, za ku buƙaci amfani da kayan aikin rosin don tattara man idan ya huce, kuma ku adana shi a kan kwalban silicon.

Alamar Magana

Lokaci: 30 ~ 40 seconds.

Zazzabi: 230 ~ 250 ℉ / 110 ~ 120 ℃

Matsi: Ji ta hanyar ji, lokacin da kuka ji matsin ya isa kuma yana da wuya a matsa ƙasa.

Karanta Kafin Amfani

1. Yi amfani da latsa Rosin kawai kamar yadda aka yi niyya.

2.Don Allah ka nisantar da yara daga injin.

3. Da fatan za a tabbatar da madaidaicin kanti kafin amfani da na'urar.

4.Cautions, konewa za a iya faruwa a lokacin da lamba tare da zafi surface.

5.Kashe na'urar lokacin da ba a amfani da shi kuma cire filogi.

Ƙayyadaddun samfur

Samfurin Sku.: HP230C-X

Sunan samfur: Rosin-tech Heat Press

Salon Samfurin: Mini Mechanism

Bayanan Lantarki:

US: 110V/60Hz, 110W

EU: 220V/50Hz, 110W

Girman: 5 x 7.5cm/2 x 3 inch

Mai Gudanarwa: Cibiyar Kula da Dijital

NW: 4.5kg, GW: 5kg

PKG: 29*20*31cm

Saitin Panel Control