Xinhong Heat Press

Abubuwan da aka gyara

 Daidaita MatsiWrench

Bayani:

Lambar Abu: RP100

Salon Abu:Mini Manual

Girman: 5*7.5cm  Mai sarrafawa:DijitalKwamitin Kulawa

Bayanan Lantarki:220V/50Hz,160W

NW: 5.5kg,GW:6.5kg

PKG:36*32*20cm, paperkartani

Matsa zafi kuma hanya ce mai kyau don hakar man rosin.Kunna mai sarrafawa, saita zafin da ake so da lokaci;kuma saita matsa lamba da ake so.Sannan sanya jakar shayi mai cike da tacewa tsakanin takarda mai folded pr-folded.Sanya takarda mai naɗewa tsakanin hanyoyin zafi da aiki dangane da salon latsa zafin zafin rosin-tech, yawanci suna da sauƙi na jagora, na'urar numfashi, na'ura mai aiki da karfin ruwa da lantarki.Lokacin da lokacin ya ƙare zuwa Zero, nan da nan cire takarda daga tushen zafi kuma saka tsakanin faranti masu sanyaya. .Da fatan za a sake yin tsari akan jakar shayi iri ɗaya tace har sai kun gamsu da sakamakon!

- Zazzabi

- Adadin Lokacin da aka danna

- Adadin Ƙarfin da Aka Aiwatar

- Girman / Nauyin nanufa

1. Karanta Kafin Amfani

1. Duba wutar lantarki kafin amfani da shi.Madaidaicin ƙarfin lantarki shine220-240V/50Hz.

2. Kashe injin lokacin da ba a amfani da shi, kuma cire filogin wuta dagasoket.KoyaushekEep yara daga injin.

3.Kar a taɓa murfin dumama farantin ko farantin bayan latsa yayin aiki.

5.Kar a saita yanayin zafi sama da haka150℃, yanayin aikace-aikacen al'ada.is cikin150℃ 

2. Na'urorin haɗi da aka ba da shawarar 

25 lb ko Takardun Takardun Silicone Mafi Kauri

AllonTace kamar5 x10 cm

Rosin Tools

3.NasihaAikiSiga 

Lokaci:30~45dakika

Temp.:100-120℃

Matsin lamba:Ji ta hanyar ji, lokacin da kuka ji matsin ya isa kuma yana da wuya a matsa ƙasa.

4.Control Panel Saitin

Hoto 1	Hoto 2	Hoto 3
Latsa maɓallin Saita akan sashin kulawa (Fig. 1) don zuwa yanayin zafiyanayin saitin don saman farantin.	Danna sama ↑ ko ƙasa ↓ maɓallan don zaɓar zafin da ake so (Fig.2).Ana nuna zafin da aka zaɓa akan layin nuni.Tukwici:Shigar da zafin jiki ko dai a °F ko °C;za ku iya zaɓarma'aunin zafin jiki daga baya.	Danna Saita maɓallin sake (Fig. 3) don zuwa yanayin saitin zafin jikidon farantin kasa.
Hoto 4	Hoto 5	Hoto 6
Latsa maɓallan sama ↑ ko ƙasa ↓ don zaɓar zafin da ake so (Fig. 4). Ana nuna zafin da aka zaɓa akan layin nuni.	Danna Saita maɓallin sake (Fig. 5) don shiga yanayin saitin mai ƙidayar lokaci.	Danna Up ↑ ko Down ↓ maɓallan don zaɓar lokacin da ake so a cikin daƙiƙa (Fig.6).
Hoto 7	Hoto 8	Hoto 9
Danna maɓallin Saita don zuwa yanayin zaɓin ma'aunin zafin jiki (Fig. 7). Tukwici: Dangane da tsoffin saitunan injin ku, kuna iya ko dai ganin “F” ko "C" akan nunin da ke nuna ma'aunin zafin jiki da aka zaɓa a halin yanzu (°Fko kuma ° C).	Danna sama ↑ ko ƙasa ↓ maɓallan don zaɓar ko dai °F ko °C (Fig. 8) KO tsallakewannan mataki idan kun gamsu da zaɓi na yanzu	Danna Saita maɓallin Sau Biyu (Hoto 9) don yin rikodin duk na'urorin sarrafawasaituna.Faranti sun fara dumama, kuma ana nuna gumakan dumamaakan allon (Fig. 10).
Hoto 10	Hoto na 11 (MATA)	Hoto 12(CIGABA DA LATSA)
	Jira har sai faranti sun kai zafin da ake so da dumamaana kashe gumaka (Fig. 11).	Lokacin da aka saita zafin jiki, alamar dumama ta ɓace, sannan danna TIMER don farawa.

5.Yadda Ake Amfani da Rosin Press

●Toshe soket ɗin wuta, kunna wutar lantarki, saita temp./lokaci don kowane kwamiti mai sarrafawa, Ka ce.110℃, dakika 30.kuma yana tasowa zuwa yanayin da aka saita.

● Saka rosin hash ko tsaba a cikin jakar tacewa

●Saka murfin jakar matattarar rosin ta takarda mai siliki, da sanyawa kan ƙaramin dumama.

●Don ainihin samfurin jagora, da farko kuna buƙatar ƙara matsa lamba ta amfani da matsi na daidaita matsi don daidaita goro.Da fatan za a lura cewa kar a daidaita matsa lamba mai girma sosai, wannan na iya haifar da matsalar injin kamar karyewar hannu, kuma zai yi tasiri ga rayuwar sabis na injin rosin.

●Rosin zai zama manne da takarda mai siliki, zaku iya amfani da kayan aikin rosin don tattara rosin lokacin da suke da ruwa.Kuma zaka iya tattara rosin da yin ajiya.